View HSMY-A100-K45J2_7670373.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

description this family of smt leds is packaged in the industry standard plcc-2 package. these smt leds have high reliability performance and are designed to work under a wide range of environmental conditions. this high reliability feature makes them ideally suited to be used under harsh interior automotive as well as interior signs application conditions. to facilitate easy pick & place assembly, the leds are packed in eia-compliant tape and reel. every reel will be shipped in single intensity and color bin, except red color, to provide close uniformity. agilent hsmx-a10x-xxxxx plcc-2 surface mount led indicator data sheet features industry standard plcc-2 package high reliability led package high brightness using alingap and ingan dice technologies available in full selection of colors super wide viewing angle at 120? available in 8 mm carrier tape on 7 inch reel (2000 pieces) compatible with both ir and ttw soldering process applications interior automotive instrument panel backlighting central console backlighting cabin backlighting electronic signs and signals interior full color sign variable message sign office automation, home appli- ances, industrial equipment front panel backlighting push button backlighting display backlighting caution: hsmn,m,k and e-a10x-xxxxx leds are class 2 esd sensitive. please observe appropriate precautions during handling and processing. refer to agilent application note an-1142 for additional details. these leds are compatible with ir solder reflow process. due to the high reliability feature of these products, they can also be mounted using through-the-wave soldering process. the super wide viewing angle at 120? makes these leds ideally suited for panel, push button, or general backlighting in automotive interior, office equipment, industrial equipment, and home appliances. the flat top emitting surface makes it easy for these leds to mate with light pipes. with the built-in reflector pushing up the intensity of the light output, these leds are also suitable to be used as led pixels in interior electronic signs.
2 package dimensions 0.8 ?0.3 3.5 ?0.2 2.8 ?0.2 0.5 ?0.1 3.2 ?0.2 2.2 ?0.2 1.9 ?0.2 0.1 typ. 0.8 ?0.1 cathode marking (anode marking for algaas devices) 5.2 ?0.2 2.8 ?0.2 0.5 ?0.1 0.1 typ. 3.2 ?0.2 2.2 ?0.2 1.9 ?0.2 cathode marking note: all dimensions in millimeters. top mount reverse mount
3 device selection guide red part number min. iv (mcd) typ. iv (mcd) max. iv (mcd) test current (ma) dice technology hsms-a100-j00j1 4.0 15.0 - 20 gap hsms-a100-l00j1 10.0 15.0 - 20 gap hsms-a100-h70j2 3.0 - 8.0 10 gap hsms-a100-j80j2 5.0 - 15.5 10 gap hsmh-a100-l00j1 10.0 15.0 - 20 algaas hsmh-a100-n00j1 25.0 50.0 - 20 algaas hsmh-a100-l70j2 12.5 - 32.0 10 algaas hsmh-a100-m80j2 20.0 - 62.0 10 algaas hsmh-a100-p30j1 40.0 - 100.0 20 algaas hsmc-a100-j00j1 4.0 100.0 - 20 alingap hsmc-a100-q00j1 63.0 100.0 - 20 alingap hsmc-a100-r00j1 100.0 140.0 - 20 alingap hsmc-a101-s00j1 160.0 220.0 - 20 alingap hsmz-a100-t00j1 250.0 350.0 - 20 alingap hsmc-a100-p30j1 40.0 - 100.0 20 alingap hsmc-a100-q40j1 63.0 - 200.0 20 alingap hsmc-a101-r80j1 125.0 - 395.0 20 alingap hsmz-a100-s80j1 200.0 - 620.0 20 alingap red orange part number min. iv (mcd) typ. iv (mcd) max. iv (mcd) test current (ma) dice technology hsmj-a100-q00j1 63.0 100.0 - 20 alingap hsmj-a101-s00j1 160.0 200.0 - 20 alingap hsmv-a100-t00j1 250.0 350.0 - 20 alingap hsmj-a100-q30j1 63.0 - 155.0 20 alingap hsmj-a100-r40j1 100.0 - 315.0 20 alingap hsmj-a101-r80j1 125.0 - 395.0 20 alingap hsmv-a100-s80j1 200.0 - 620.0 20 alingap orange part number min. iv (mcd) typ. iv (mcd) max. iv (mcd) test current (ma) dice technology hsmd-a100-j00j1 4.0 15.0 - 20 gap hsmd-a100-l00j1 10.0 15.0 - 20 gap hsmd-a100-j7pj2 5.0 - 12.5 10 gap hsmd-a100-k4pj2 6.3 - 20.0 10 gap hsml-a100-q00j1 63.0 100.0 - 20 alingap hsml-a101-s00j1 160.0 220.0 - 20 alingap hsml-a100-q7pj1 80.0 - 200.0 20 alingap hsml-a100-r7pj1 125.0 - 315.0 20 alingap hsml-a101-r8wj1 125.0 - 395.0 20 alingap
4 device selection guide, continued yellow/amber part number min. iv (mcd) typ. iv (mcd) max. iv (mcd) test current (ma) dice technology hsmy-a100-j00j1 4.0 12.0 - 20 gap hsmy-a100-l00j1 10.0 12.0 - 20 gap hsmy-a100-j35j2 4.0 - 10.0 10 gap HSMY-A100-K45J2 6.3 - 20.0 10 gap hsma-a100-q00j1 63.0 100.0 - 20 alingap hsma-a101-s00j1 160.0 220.0 - 20 alingap hsmu-a100-s00j1 160.0 320.0 - 20 alingap hsma-a100-q35j1 63.0 - 155.0 20 alingap hsma-a100-r45j1 100.0 - 315.0 20 alingap hsma-a101-r8wj1 125.0 - 395.0 20 alingap hsmu-a100-s4wj1 160.0 - 500.0 20 alingap yellow green part number min. iv (mcd) typ. iv (mcd) max. iv (mcd) test current (ma) dice technology hsmg-a100-j02j1 4.0 18.0 - 20 gap hsmg-a100-k72j2 8.0 - 20.0 10 gap hsme-a100-m02j1 16.0 70.0 - 20 alingap hsme-a100-n82j1 30.0 - 100.0 20 alingap emerald green part number min. iv (mcd) typ. iv (mcd) max. iv (mcd) test current (ma) dice technology hsmg-a100-h01j1 2.5 8.0 - 20 gap hsmg-a100-g31j2 1.6 - 4.0 10 gap hsmg-a100-h41j2 2.5 - 8.0 10 gap hsme-a100-l01j1 10.0 40.0 - 20 alingap hsme-a100-m3pj1 16.0 - 40.0 20 alingap green part number min. iv (mcd) typ. iv (mcd) max. iv (mcd) test current (ma) dice technology hsmm-a101-r00j1 100.0 200.0 - 20 ingan hsmm-a100-s00j1 160.0 350.0 - 20 ingan hsmm-a101-q7pj1 80.0 - 200.0 20 ingan hsmm-a101-r7pj1 125.0 - 315.0 20 ingan hsmm-a101-r8pj1 125.0 - 395.0 20 ingan hsmm-a100-s8pj1 200.0 - 620.0 20 ingan
5 device selection guide, continued cyan part number min. iv (mcd) typ. iv (mcd) max. iv (mcd) test current (ma) dice technology hsmk-a101-r00j1 100.0 170.0 - 20 ingan hsmk-a100-s00j1 160.0 280.0 - 20 ingan hsmk-a100-s8wj1 200.0 - 620.0 20 ingan hsmk-a101-q3wj1 63.0 - 155.0 20 ingan hsmk-a101-r4wj1 100.0 - 315.0 20 ingan blue part number min. iv (mcd) typ. iv (mcd) max. iv (mcd) test current (ma) dice technology hsmb-a100-j00j1 4.0 15.0 - 20 gan hsmb-a100-j70j2 5.0 - 12.5 10 gan hsmb-a100-k80j2 8.0 - 25.0 10 gan hsmn-a101-n00j1 25.0 50.0 - 20 ingan hsmn-a100-p00j1 40.0 70.0 - 20 ingan hsmn-a101-n7yj1 30.0 - 80.0 20 ingan hsmn-a101-n8yj1 30.0 - 100.0 20 ingan hsmn-a100-p8yj1 50.0 - 155.0 20 ingan note: 1. the luminous intensity, i v , is measured at the mechanical axis of the lamp package. the actual peak of the spatial radiation pattern may not be aligned with this axis.
6 packaging option color bin selection intensity bin select device specific configuration package type led chip color hsm x 1 - a x 2 x 3 x 4 - x 5 x 6 x 7 x 8 x 9 part numbering system absolute maximum ratings (t a = 25 c) parameters hsm s/d/y/g hsmh hsmc/j/l/a hsme hsmz/v/u hsmm/k/b/n dc forward current [1] 30 ma 30 ma 30 ma [3,4] 20 ma [3,4] 30 ma [3,4] 30 ma peak forward current [2] 100 ma 100 ma 100 ma 100 ma 100 ma 100 ma power dissipation 63 mw 60 mw 63 mw 48 mw 72 mw 114 mw reverse voltage 5 v junction temperature 110 c operating temperature ?5 c to +100 c storage temperature 55 c to +100 c notes: 1. derate linearly as shown in figure 4. 2. duty factor = 10%, frequency = 1 khz. 3. drive current between 10 ma and 30 ma is recommended for best long term performance. 4. operation at current below 5 ma is not recommended.
7 electrical characteristics (t a = 25?c) forward voltage reverse voltage reverse voltage thermal v f (volts) @ i f = 20 ma v r @ 100 av r @ 10 a resistance part number typ. max. min. min. r jp ( c/w) hsms/d/y/g 2.2 2.6 5 180 hsmh 1.9 2.6 5 180 hsmc/j/l/a/e 1.9 2.4 5 280 hsmz/v/u 2.2 2.6 5 280 hsmb 3.9 4.3 5 280 hsmm/k/n 3.4 4.05 5 280 optical characteristics (t a = 25?c) viewing luminous peak dominant angle luminous intensity/ wavelength wavelength [1] 2 1/2 [2] efficacy v [3] total flux dice peak (nm) d (nm) (degrees) (lm/w) i v (mcd)/ v (mlm) color part number technology typ. typ. typ. typ. typ. red hsms-a100 gap 635 626 120 120 0.45 hsmh-a100 algaas 645 637 120 63 0.45 hsmc-a10x alingap 635 626 120 150 0.45 hsmz-a100 alingap 639 630 120 155 0.45 red orange hsmj-a10x alingap 621 615 120 240 0.45 hsmv-a100 alingap 623 617 120 263 0.45 orange hsmd-a100 gap 600 602 120 380 0.45 hsml-a10x alingap 609 605 120 320 0.45 amber hsmy-a100 gap 583 585 120 520 0.45 hsma-a10x alingap 592 590 120 480 0.45 hsmu-a100 alingap 594 592 120 500 0.45 yellow green hsmg-a100 gap 565 569 120 590 0.45 hsme-a100 alingap 575 570 120 560 0.45 emerald green hsmg-a100 gap 558 560 120 650 0.45 hsme-a100 alingap 566 560 120 610 0.45 green hsmm-a10x ingan 523 525 120 500 0.45 cyan hsmk-a10x ingan 502 505 120 300 0.45 blue hsmb-a100 gan 428 462 120 65 0.45 hsmn-a10x ingan 468 470 120 75 0.45 notes: 1. the dominant wavelength, d , is derived from the cie chromaticity diagram and represents the color of the device. 2. 1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity. 3. radiant intensity, i e in watts/steradian, may be calculated from the equation i e = i v / v , where i v is the luminous intensity in candelas and v is the luminous efficacy in lumens/watt.
8 figure 1. relative intensity vs. wavelength. figure 2. forward current vs. forward voltage. figure 3. relative intensity vs. forward current. figure 4. maximum forward current vs. ambient temperature. derated based on t j max = 110?c, r ja = 500?c/w. 020 dc forward current ?ma 0 0.4 1.8 relative luminous intensity (normalized at 20 ma) 35 0.8 0.2 1.0 10 0.6 1.2 25 alingap gap 515 30 1.4 1.6 algaas gan ingan wavelength nm relative intensity 1.0 0.8 0 380 480 580 680 730 780 630 530 430 gan blue gap emerald green gap orange gap red 0.6 0.4 0.2 gap yellow gap yellow green figure 5. dominant wavelength vs. forward current ?ingan devices. 020 current ma 460 480 540 dominant wavelength nm 35 500 470 510 10 490 520 25 green 515 30 530 cyan blue wavelength nm emerald green relative intensity 1.0 0.8 0 380 480 580 680 730 780 630 530 430 blue cyan 0.6 0.4 0.2 green yellow green amber orange red orange red 0.1 0.3 0.5 0.7 0.9 03 forward voltage v 0 10 30 35 forward current ma 5 5 20 15 25 12 4 hsmc/j/l/a/e hsmm/k/n hsmh hsms/d/y/g hsmz/v/u hsmb 0 35 0 20 60 80 120 current ma temperature c 40 20 25 15 hsmh 10 30 100 hsms/d/g/ y/u/v/z 5 hsmc/j/l/a/e hsmm/k/b/n
9 figure 8a. recommended snpb reflow soldering profile. 240 c max. 20 sec. max. 3 c/sec. max. 120 sec. max. time temperature 183 c 100-150 c 6 c/sec. max. 60-150 sec. 3 c/sec. max. figure 7. radiation pattern. normalized intensity 1.0 0 angular displacement degrees 0.8 0.6 0.2 0.4 -70 -50 -30 0 2030507090 -90 -20 -80 -60 -40 -10 10 40 60 80 figure 9. recommended wave soldering profile. delta v f (normalized at 25 c) -0.3 -100 temperature c 0.5 0.4 0.2 0.1 0 -0.2 150 50 -50 0 100 -0.1 0.3 gap/algaas/ alingap ingan/gan figure 6. forward voltage shift vs. temperature. figure 8b. recommended pb-free reflow soldering profile. laminar wave bottom side of pc board hot air knife turbulent wave fluxing preheat 01020 30 50 100 150 200 250 30 40 50 time seconds temperature c 60 70 80 90 100 top side of pc board conveyor speed = 1.83 m/min (6 ft/min) preheat setting = 150 c (100 c pcb) solder wave temperature = 245 c air knife air temperature = 390 c air knife distance = 1.91 mm (0.25 in.) air knife angle = 40 solder: sn63; flux: rma note: allow for boards to be sufficiently cooled before exerting mechanical force. figure 10. recommended soldering pad pattern. 2.60 4.50 1.50 solder resist 217 c 200 c 60 - 120 sec. 6 c/sec. max. 3 c/sec. max. (acc. to j-std-020c) 3 c/sec. max. 150 c 255 - 260 c 100 sec. max. 10 to 30 sec. time temperature
10 figure 11. tape leader and trailer dimensions. 200 mm min. for ? 180 reel. 200 mm min. for ? 330 reel. trailer component leader 480 mm min. for ? 180 reel. 960 mm min. for ? 330 reel. c a user feed direction figure 12. tape dimensions. c a 4 0.1 4 0.1 2 0.05 3.05 0.1 3.5 0.05 8 +0.3 0.1 1.75 0.1 3.81 0.1 2.29 0.1 0.229 0.01 8 ? 1.5 +0.1 0 ? 1 +0.1 0
11 baking is required under the fol- lowing conditions: a) the humidity indicator turns pink b) the pack has been opened for more than four weeks. baking recommended condition: 60 5?c for 20 hours. this product is qualified as mois- ture sensitive jedec level 2a. figure 13. reel dimensions. 14.4 (max. measured at hub) 7.9 (min.) 10.9 (max.) 62.5 2 +0.5 0 20.5 0.3 13 0.2 +0 2.5 8.4 (measured at outer edge) +1.50 0.00 180 label area (111 mm x 57 mm) with depression (0.25 mm) figure 14. reeling orientation. cathode side printed label user feed direction
intensity bin select (x 5 x 6 ) individual reel will contain parts from one half bin only. x 5 min i v bin x 6 0 full distribution 3 3 half bins starting from x 5 1 4 4 half bins starting from x 5 1 5 5 half bins starting from x 5 1 7 3 half bins starting from x 5 2 8 4 half bins starting from x 5 2 9 5 half bins starting from x 5 2 intensity bin limits bin id min. (mcd) max. (mcd) g1 1.80 2.24 g2 2.24 2.80 h1 2.80 3.55 h2 3.55 4.50 j1 4.50 5.60 j2 5.60 7.20 k1 7.20 9.00 k2 9.00 11.20 l1 11.20 14.00 l2 14.00 18.00 m1 18.00 22.40 m2 22.40 28.50 n1 28.50 35.50 n2 35.50 45.00 p1 45.00 56.00 p2 56.00 71.50 q1 71.50 90.00 q2 90.00 112.50 r1 112.50 140.00 r2 140.00 180.00 s1 180.00 224.00 s2 224.00 285.00 t1 285.00 355.00 t2 355.00 450.00 u1 450.00 560.00 u2 560.00 715.00 v1 715.00 900.00 v2 900.00 1125.00 tolerance of each bin limit = 12%. color bin select (x 7 ) individual reel will contain parts from one full bin only. x 7 0 full distribution z a and b only y b and c only w c and d only v d and e only u e and f only t f and g only s g and h only q a, b, and c only p b, c, and d only n c, d, and e only m d, e, and f only l e, f, and g only k f, g, and h only 1 a, b, c, and d only 2 e, f, g, and h only 3 b, c, d, and e only 4 c, d, e, and f only 5 a, b, c, d, and e only 6 b, c, d, e, and f only color bin limits blue min. (nm) max. (nm) a 460.0 465.0 b 465.0 470.0 c 470.0 475.0 d 475.0 480.0 green min. (nm) max. (nm) a 515.0 520.0 b 520.0 525.0 c 525.0 530.0 d 530.0 535.0 cyan min. (nm) max. (nm) a 490.0 495.0 b 495.0 500.0 c 500.0 505.0 d 505.0 510.0 color bin limits emerald green min. (nm) max. (nm) a 552.5 555.5 b 555.5 558.5 c 558.5 561.5 d 561.5 564.5 orange min. (nm) max. (nm) a 597.0 600.0 b 600.0 603.0 c 603.0 606.0 d 606.0 609.0 e 609.0 612.0 red orange min. (nm) max. (nm) a 611.0 616.0 b 616.0 620.0 red min. (nm) max. (nm) full distribution tolerance of each bin limit = 1 nm. amber min. (nm) max. (nm) a 582.0 584.5 b 584.5 587.0 c 587.0 589.5 d 589.5 592.0 e 592.0 594.5 f 594.5 597.0 yellow green min. (nm) max. (nm) e 564.5 567.5 f 567.5 570.5 g 570.5 573.5 h 573.5 576.5 12
packaging option (x 8 x 9 ) option test current package type reel size j1 20 ma top mount 7 inch j4 20 ma top mount 13 inch h1 20 ma reverse mount 7 inch h4 20 ma reverse mount 13 inch j2 10 ma top mount 7 inch j5 10 ma top mount 13 inch h2 10 ma reverse mount 7 inch h5 10 ma reverse mount 13 inch www.agilent.com/semiconductors for product information and a complete list of distributors, please go to our web site. for technical assistance call: americas/canada: +1 (800) 235-0312 or (916) 788-6763 europe: +49 (0) 6441 92460 china: 10800 650 0017 hong kong: (+65) 6756 2394 india, australia, new zealand: (+65) 6755 1939 japan: (+81 3) 3335-8152 (domestic/interna- tional), or 0120-61-1280 (domestic only) korea: (+65) 6755 1989 singapore, malaysia, vietnam, thailand, philippines, indonesia: (+65) 6755 2044 taiwan: (+65) 6755 1843 data subject to change. copyright ?2004-2005 agilent technologies, inc. obsoletes 5989-3100en october 31, 2005 5989-4186en

▲Up To Search▲

Price & Availability of HSMY-A100-K45J2

	To Download HSMY-A100-K45J2 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .